Specialist Systems
from
not sure yet?
Tell us about your project and we'll guide you.
SWR’s protective screen range covers stainless steel, glass and perspex screening solutions for commercial, industrial and architectural applications, with a solution for every budget and location. Ready-to-fit kits from our large UK stock holding for fast turnaround, or fully bespoke solutions designed and fabricated in-house for non-standard requirements.
Protective screens are supplied as ready-to-fit kits or fully bespoke fabricated panels — depending on your application and budget. All systems are designed, fabricated and supplied from SWR’s in-house facility with a large UK stock holding for fast turnaround.
Toughened, or toughened and laminated glass screening panels for applications where visibility through the screen is required. Clean, contemporary appearance. Suited to architectural and commercial settings.
Perspex (acrylic) screening panels — a lightweight, cost-effective alternative to glass for applications where full transparency is needed. Available in clear, frosted and coloured variants.
Stainless steel frame systems to suit your screen panel type. Floor fixed, wall fixed or free-standing configurations available.
Full support available. Contact us to explain your project and fixing substrates and we will advise you with the best solution.
Know what you need? Buy components directly from our online store. Have a more complex layout? Send us your drawings or dimensions and we’ll design a full bespoke system and provide a detailed quote.
Each of the four systems below is a complete, modular product set designed for a specific application, built to your spec, fully matched and priced as one. Pick the one that fits your project.
ALUMINIUM CHANNEL · WIND RESISTANT · INDOOR/OUTDOOR
A balustrade system built specifically to reduce wind exposure on elevated or coastal outdoor spaces, without blocking the view or the light. Glass or solid panel infill within a stainless post frame, sized and positioned to act as a wind break where it’s needed most.
MALLEABLE IRON · NO WELDING · FAST ASSEMBLY
Malleable iron fittings clamped onto standard stainless or galvanised tube, assembled on site with a hex key, no welding, no specialist trades. A modular railing system that goes up quickly and can be reconfigured just as easily. Available in hot-dip galvanised, powder coat or bare finish. Compliant with UK building regulations when correctly specified.
SOLID PANEL · STAINLESS OR MILD STEEL · BESPOKE SIZING
Solid or semi-solid stainless screen panels within a post frame, designed to provide a physical barrier where open infill won’t do the job. Used on commercial rooftops to screen plant and equipment, in industrial settings to guard machinery, and in public buildings where a solid barrier is a safety or planning requirement. Bespoke panel sizing available to suit non-standard openings.
PERFORATED STEEL · SEMI-OPAQUE · POWDER COAT FINISH
Stainless or mild steel panels with a punched perforation pattern, set within SWR’s standard modular post frame. Semi-opaque, offering more privacy and wind resistance than wire, more light and air than a solid panel. Perforation patterns available in a range of open areas depending on the level of screening required. Powder coat finish available across the full RAL range.
SWR has been supplying tested and certified balustrade and screening systems since 1989. Our in-house fabrication facility enables us to offer both standard ready-to-fit solutions and fully bespoke designs, covering non-standard panel sizes, complex fixing requirements and unusual substrate conditions. Every system is designed to meet the structural and safety requirements of its specific application.
For further system information please visit our knowledge hub.
Addenbrookes Hospital required a large-scale balustrade solution that could improve safety while fitting neatly into a busy healthcare setting.
SWR supplies protective screens for permanent commercial and industrial installations in either toughened, or toughened and laminated glass or perspex (acrylic) for lightweight, cost-effective applications where full transparency is needed. The right material depends on your application, environment and budget — the team will advise at quote stage.
Protective screens are used across a wide range of commercial and industrial applications: plant and equipment screening on commercial rooftops, machinery guarding in industrial settings, permanent safety barriers in public buildings and commercial properties, and architectural feature screening in offices, hospitality venues and retail environments. If your application involves a solid or semi-transparent barrier — rather than an open infill like wire or perforated panel — a protective screen is likely the right solution.
Yes. SWR offers both a supply-only and a supply and install option. Our network of approved installers cover the whole of UK. Contact the team with details of your project and location.
Small protective screens can often be dispatched within 3 working days. Larger and more complex fabricated screens sometimes require additional time for design and fabrication. Quotes are turned around within 24 working hours of receiving your drawings or dimensions, with fabrication lead times confirmed at quote stage. For urgent requirements, speak to the team directly and we’ll confirm what’s achievable.
Tell us your application, your material preference — stainless, glass or Perspex — and whether you need a standard kit or a bespoke solution. We’ll come back with a specification and price, fast.
