Glass Balustrades · ONLEVEL
from
not sure yet?
Tell us about your project and we'll guide you.
Engineered by ONLEVEL | Supplied & installed by SWR
Pre-assembled aluminium posts with a satin-anodised finish. OnLevel’s 3-step installation philosophy makes PiKasso 40 minutes faster per post than conventional systems — and lighter, slimmer, and more cost-effective than stainless equivalents.
A typical 6-metre PiKasso run includes the components below, pre-assembled at the OnLevel factory in Europe. Supply-only or supplied and installed by SWR in the UK.
Pre-assembled 50×50mm aluminium posts with satin-anodised finish. Pre-drilled threads for clamping fixtures.
10mm toughened or 13.52mm toughened and laminated glass panels, cut and edge-polished to your run dimensions.
Aluminium posts suitable for fitting to concrete, timber or steel substrates.
OnLevel 3-step installation guide (printed and PDF), torque specification card, plus SWR’s UK-specific installation notes.
Specify your PiKasso system online — post height, post spacing, glass thickness, finish and run length — and get a full component list and price to your inbox. In stock and available for next day delivery once confirmed.
OnLevel-engineered front elevation, plan and post-detail drawings for the standard PiKasso specification. Full DWG and Revit files available on request to architects via SWR.
OnLevel Specification Pack
CAD Block · DWG
BIM Object · Revit
SWR Installation Notes
PiKasso is tested by OnLevel to a 0.74kN line load and 1.8kN wind load at 1100mm centres and is BS 6180:2011 compliant. SWR supplies the system throughout the UK.
Download the brochure:
PiKasso — Technical Data Sheet
PiKasso — Installation Guide
PiKasso is OnLevel’s pre-assembled aluminium glass post system, designed and engineered in Germany. SWR is an OnLevel Approved Partner.
- System design & structural engineering
- Aluminium extrusion & anodising
- Pre-assembly at the German factory
- Static load & wind load testing
- Original specification documentation
- UK warehouse & same-day despatch
- Project-specific BS 6180 advice
- UK base anchor specification
- Network of installers covering the UK
- Single point of contact for the customer
OnLevel’s PiKasso is an aluminium glass post system that works great on decking and terraces.
Commercial balcony balustrade →
Existing balcony refurbishment where the slim aluminium profile is easier to retrofit than stainless modular alternatives.
Retrofit balcony balustrade →
Family homes where a fully-stainless glass system would be over-spec. PiKasso lands at roughly 40% less than stainless equivalents.
Residential glass balustrade →
Mid posts and end posts — PiKasso components available individually on the SWR shop with next-day despatch.
Visit PiKasso on the shop →
One of SWR’s most ambitious installations to date.
Material, installation speed and cost. PiKasso uses precision-engineered aluminium rather than stainless steel — significantly lighter and more cost-effective while still being fully tested and load rated. The posts arrive fully assembled with clamps pre-fitted, so there’s no on-site fabrication required. And because PiKasso is held in stock for next day delivery, there are no lead time delays. For projects where stainless steel is not a hard requirement, PiKasso delivers the same clean glass post aesthetic at lower cost and faster.
PiKasso is compatible with 10mm toughened and 13.52mm toughened and laminated glass. Glass panels are supplied cut to your specified dimensions. Confirm your panel sizes at quote stage and we’ll supply glass matched to the PiKasso clamp specification.
Yes. PiKasso is suitable for both internal and external applications. The satin anodized aluminium finish is weather resistant and suitable for outdoor environments. For coastal or highly corrosive environments, confirm your location at quote stage and the team will advise on any additional treatment or alternative specification.
Fix the pre-assembled posts to the floor substrate. Set the toughened glass panels into the pre-fitted clamps. Finish with a top rail if specified. That’s it. No welding, no specialist fabrication, no complex on-site adjustments. A competent general contractor can install a complete PiKasso system without specialist trades. Full installation documentation is supplied with every order.
Yes. Satin anodized finish is standard across the full range. Powder coat is available in custom RAL colours for projects where a specific colour match is required — ideal for commercial projects, hospitality venues and residential projects with a defined colour scheme. Confirm your RAL reference at quote stage.
Tell us your run length, glass thickness, finish preference and application — internal or external, residential or commercial — and we’ll come back with a full PiKasso component list and price. In stock, next day delivery available.
